 |
 |
 |
|
 |
|
 |
|
 |
|
 |
Accessories
| To view pricing or place an order please login/register | ||||
APEX High Sensitivity System |
||||
| Product Name | Part # | Cross Ref # | OEM | Details |
|
Apex Q
The Apex Q has an o-ring-free Quartz flow path for high sensitivity and low background for samples that do not contain hydrofluoric acid. The Apex Q gives the fastest rinse-out of any high sensitivity ICP introduction system. For configuration options, see the APEX Configuration Sheet (Library & Resources). If you have any questions please do not hesitate to contact Spectron, Inc. directly. |
43zz-ait0-xx | Details | ||
|
Apex HF
The Apex HF uses a high-purity PFA Teflon flow path to provide resistance to hydrofluoric acid. The Apex HF is recommended for many geochemistry and semiconductor applications where samples containing HF are analyzed. |
44zz-ait0-xx | Details | ||
|
Apex IR
The Apex IR has been developed for Isotope Ratio analysis. It has a quartz flow path and includes an additional mixing chamber that further homogenizes and stabilizes the sample aerosol stream, resulting in a more stable signal from the ICP-MS. |
45zz-ait0-xx | Details | ||
|
Apex E
The Apex E is a low cost unit primarily designed for ICP Emission systems. The sample path is made from Pyrex and temperature settings of the heater and chiller are fixed. |
48zz-ait0-xx | Details | ||
|
Apex Product Line
For additional information and a list of available products go to: |
Apex-All | Details | ||
Hot Block |
||||
| Product Name | Part # | Cross Ref # | OEM | Details |
|
Hot Block Product Line
For additional information and a list of available products go to: |
Hot Block - All | Details | ||
|
36 - Well HotBlock Digestor
The SC100 with its 36 sample capacity was the first model in the HotBlock family and is used daily in hundreds of laboratories around the world. All electronics are self contained and isolated in a separate compartment below the block - no need for a separate controller and clumsy cables. The SC100 is supplied with two 18-place polycarbonate racks to facilitate the loading and unloading of samples. |
SC100-36 | Details | ||
|
25 - Well Hotblock Digestor
The SC150 is designed for the digestion of larger samples. As its standard digestion vessel, it uses the SC490 screw-cap cup with polyethelene liner in the lid. Made of polypropylene, this cup is naturally clean and has a 125mL capacity. The unit has a twenty five sample capacity. Each block comes standard with one set of two racks for easy handling of multiple samples. |
SC150-25 | Details | ||
|
54 - Well HotBlock Digestor
The large capacity SC154 Hot Block will digest up to 54, 50mL samples simultaneously in just a 15 X 21.5" footprint. Constructed of Graphite and Kydex the corrosion-resistant SC154 was designed for environmental and other acid digestions prior to metals determinations. The compact size of the SC154 allows it to fit comfortably inside the HEPA filtered AirLite hood. This model comes complete with three 18-place Polycarbonate racks. These racks allow the operator to load or unload 18 samples at once. |
SC154-54 | Details | ||
Autosampler Probes |
||||
| Product Name | Part # | Cross Ref # | OEM | Details |
|
ASX-100 sample probe, with polyimide reinforcement. (20 to 100 µL/min uptake rates)
Instrument Brand: Agilent |
ES-5006-xxxx | Agilent | Details | |
|
ASX-510 self-aspiration sample probe, w/ polyimide reinforcement. (20 to 400 µL/min)
Instrument Brand: Agilent |
ES-5007-xxxx | Agilent | Details | |
Autosamplers |
||||
| Product Name | Part # | Cross Ref # | OEM | Details |
|
SC FAST Autosampler
The SC-FAST is complete automated sample introduction system for ICP / ICPMS, which improves sample throughput up to 300%. The SC-FAST increases productive instrument time by reducing sample uptake, stabilization and rinse steps. |
SC-FAST | Details | ||
Autosampler Vessels & Tubing |
||||
| Product Name | Part # | Cross Ref # | OEM | Details |
| Peristaltic Pump Tubing: 2-Stop, Blk/Blk, 0.76mm ID, 12pk | 0549-07 | N0777043 | Details | |
| Peristaltic Pump Tubing: 2-Stop, Blk/Blk, 0.76mm ID, 12pk - Flared Ends | 0549-07F | N0777043 | Details | |
| Peristaltic Pump Tubing: 2-Stop, Red/Red, 1.14mm ID, 12pk | 0549-10 | N0680375 | Details | |
| Peristaltic Pump Tubing: 2-Stop, Red/Red, 1.14mm ID, 12pk - Flared Ends | 0549-10F | N0680375 | Details | |
|
Peristaltic Pump Tubing - Flared
For a list of available products go to: |
PPT-Flared-All | Details | ||
| Peristaltic Pump Tubing: 3-Stop, Org/Red/Org, 0.19mm ID, 12pk | SC0049 | G1820-65220 | Details | |
| Peristaltic Pump Tubing: 3-Stop, Org/Red/Org, 0.19mm ID, 12pk - Flared Ends | SC0049-F | G1820-65220 | Details | |
| Peristaltic Pump Tubing: 3-Stop, Org/Blue/Org, 0.25mm ID, 12/pk | SC0050 | 5064-8034 | Details | |
| Peristaltic Pump Tubing: 3-Stop, Org/Blu/Org, 0.25mm ID, 12/pk - Flared Ends | SC0050-F | 5064-8034 | Details | |
| Peristaltic Pump Tubing: 3-Stop, Wht/Wht/Wht, 1.02mm ID, 12pk | SC0059 | G1820-65216 | Details | |
| Peristaltic Pump Tubing: 3-Stop, Wht/Wht/Wht, 1.02mm ID, 12pk - Flared Ends | SC0059-F | G1820-65216 | Details | |
| Peristaltic Pump Tubing: 3-Stop, Ylw/Blu/Ylw, 1.52mm ID, 12pk | SC0065 | Details | ||
| Peristaltic Pump Tubing: 3-Stop, Ylw/Blu/Ylw, 1.52mm ID, 12pk - Flared Ends | SC0065-F | Details | ||
Spectron Classic™
Since 1988, Spectron, Inc. has been manufacturing and selling the highest quality cones to the mass spectrometry community. We manufacture cones for all the major instrument brands and design and manufacture prototypes for our customers, big and small.
To choose products by manufacturer click on one of the companies below.
Spectron e•SPEC™
As a compliment to our Classic™ cones, Spectron has introduced a new series of products. These cost-effective analogues have been designed to last longer, perform better and in many cases, cost less than the OEM equivalent.
